{"id":179,"date":"2018-10-12T09:49:31","date_gmt":"2018-10-12T04:19:31","guid":{"rendered":"https:\/\/liai.co.in\/blog\/?p=179"},"modified":"2022-01-21T03:38:48","modified_gmt":"2022-01-21T03:38:48","slug":"a-small-journey-of-the-linux-important-file-etc-inittab","status":"publish","type":"post","link":"https:\/\/www.liainfraservices.com\/blog\/a-small-journey-of-the-linux-important-file-etc-inittab\/","title":{"rendered":"A small journey of the Linux important file \/etc\/inittab"},"content":{"rendered":"<\/span> 3<\/span> min read<\/span><\/span>
<\/span> 5,162<\/span><\/div>
What is the file \/etc\/inittab, why is it so important?<\/em><\/h6>\n

Let’s think of some situation, you have a server, you are unable to get the login prompt once it boots successfully. These mechanisms are controlled by some configuration which is written on \/etc\/inittab<\/strong> file. Let`s try to understand that in more detail.<\/p>\n

As we know when Linux Kernal loads itself to the memory, it tries to execute and initialize the underlying hardware. It then mounts the root (\/) file system.
\nThat’s not the end, Kernal even tries to initialize the very first process into the Linux and that is init process. (That’s why it gets an id as 1)<\/p>\n

The init process starts the Linux server based on the default run level that is set.
\nIt follows its configuration file under \/etc named \/etc\/inittab<\/strong>
\nThe configuration file (\/etc\/inittab) defined 3 main items for the init process.
\nIt defines the default run level.<\/p>\n

Which process and service to start and monitor
\nHow to handle the system when it enters into a different runlevel\/etc\/inittab file is contained with the below format
\nidentifier:run level:Action:Command<\/p>\n

\"\"<\/a><\/p>\n

Some commands are<\/strong><\/em>
\nRespawn
\nWait
\nOnce
\nBoot
\nOff<\/p>\n

\"\/etc\/inittab
\n\"\"<\/p>\n

1. Id:3:initdefault<\/strong>: This defines the default run level is set to 3.<\/strong><\/p>\n

2. System initialization : si::sysinit:<\/strong>\/etc\/rc.d\/rc.sysinit<\/strong><\/p>\n

a. This defines the system to run a script (\/etc\/rc.d\/rc.sysinit) when the system boots up.
\nb. The script initializes the system.
\nc. The script has some commands which help mount the proc file system.
\nd. The script initializes the keyboard maps, console font, NIS domain, hostname, and swap partition
\ne. This script runs only during the boot.<\/p>\n

3. l3:3:wait:\/etc\/rc.d\/rc<\/strong> 3<\/strong><\/p>\n

a. L3 — > It is descriptive and can be anything
\nb. 3 \u2192 list of run level under which the script should be executed(\/etc\/rc.d\/rc 3)
\nc. Wait — > Wait till \/etc\/rc.d\/rc completes its execution<\/p>\n

4. co:2345:respawn:\/sbin\/agetty<\/strong>xvc0 9600 vt100-nav<\/strong><\/p>\n

a. Getty is nothing but gets try, this is used during login to provide login prompt to the user and that invokes the \/bin\/login command
\nb. This means, run the command \/sbin\/agetty xvc0 9600 vt100-nav
\nc. This should run the command in any run level between 2 to 5(2345)
\nd. respawn means to restart the process if it dies.<\/p>\n

Summary about init process:<\/h6>\n